Excision of Oxidatively Generated Guanine Lesions by Competitive DNA Repair Pathways

The base and nucleotide excision repair pathways (BER and NER, respectively) are two major mechanisms that remove DNA lesions formed by the reactions of genotoxic intermediates with cellular DNA. It is generally believed that small non-bulky oxidatively generated DNA base modifications are removed by BER pathways, whereas DNA helix-distorting bulky lesions derived from the attack of chemical carcinogens or UV irradiation are repaired by the NER machinery. However, existing and growing experimental evidence indicates that oxidatively generated DNA lesions can be repaired by competitive BER and NER pathways in human cell extracts and intact human cells. Here, we focus on the interplay and competition of BER and NER pathways in excising oxidatively generated guanine lesions site-specifically positioned in plasmid DNA templates constructed by a gapped-vector technology. These experiments demonstrate a significant enhancement of the NER yields in covalently closed circular DNA plasmids (relative to the same, but linearized form of the same plasmid) harboring certain oxidatively generated guanine lesions. The interplay between the BER and NER pathways that remove oxidatively generated guanine lesions are reviewed and discussed in terms of competitive binding of the BER proteins and the DNA damage-sensing NER factor XPC-RAD23B to these lesions.     

Rapid Hormetic Responses of Photosystem II Photochemistry of Clary Sage to Cadmium Exposure

Five-day exposure of clary sage (Salvia sclarea L.) to 100 μM cadmium (Cd) in hydroponics was sufficient to increase Cd concentrations significantly in roots and aboveground parts and affect negatively whole plant levels of calcium (Ca) and magnesium (Mg), since Cd competes for Ca channels, while reduced Mg concentrations are associated with increased Cd tolerance. Total zinc (Zn), copper (Cu), and iron (Fe) uptake increased but their translocation to the aboveground parts decreased. Despite the substantial levels of Cd in leaves, without any observed defects on chloroplast ultrastructure, an enhanced photosystem II (PSII) efficiency was observed, with a higher fraction of absorbed light energy to be directed to photochemistry (Φ_PSΙΙ). The concomitant increase in the photoprotective mechanism of non-photochemical quenching of photosynthesis (NPQ) resulted in an important decrease in the dissipated non-regulated energy (Φ_NO), modifying the homeostasis of reactive oxygen species (ROS), through a decreased singlet oxygen (¹O₂) formation. A basal ROS level was detected in control plant leaves for optimal growth, while a low increased level of ROS under 5 days Cd exposure seemed to be beneficial for triggering defense responses, and a high level of ROS out of the boundaries (8 days Cd exposure), was harmful to plants. Thus, when clary sage was exposed to Cd for a short period, tolerance mechanisms were triggered. However, exposure to a combination of Cd and high light or to Cd alone (8 days) resulted in an inhibition of PSII functionality, indicating Cd toxicity. Thus, the rapid activation of PSII functionality at short time exposure and the inhibition at longer duration suggests a hormetic response and describes these effects in terms of “adaptive response” and “toxicity”, respectively.     

Tailored-Made Polydopamine Nanoparticles to Induce Ferroptosis in Breast Cancer Cells in Combination with Chemotherapy

Ferroptosis is gaining followers as mechanism of selective killing cancer cells in a non-apoptotic manner, and novel nanosystems capable of inducing this iron-dependent death are being increasingly developed. Among them, polydopamine nanoparticles (PDA NPs) are arousing interest, since they have great capability of chelating iron. In this work, PDA NPs were loaded with Fe³⁺ at different pH values to assess the importance that the pH may have in determining their therapeutic activity and selectivity. In addition, doxorubicin was also loaded to the nanoparticles to achieve a synergist effect. The in vitro assays that were performed with the BT474 and HS5 cell lines showed that, when Fe³⁺ was adsorbed in PDA NPs at pH values close to which Fe(OH)₃ begins to be formed, these nanoparticles had greater antitumor activity and selectivity despite having chelated a smaller amount of Fe³⁺. Otherwise, it was demonstrated that Fe³⁺ could be released in the late endo/lysosomes thanks to their acidic pH and their Ca²⁺ content, and that when Fe³⁺ was co-transported with doxorubicin, the therapeutic activity of PDA NPs was enhanced. Thus, reported PDA NPs loaded with both Fe³⁺ and doxorubicin may constitute a good approach to target breast tumors.     

Rheokinematics for product development—Formulation screening in rotational rheometers

Product formulations for industrial processes are typically developed at laboratory scale. However, the mixing conditions are not easily mimicked in the laboratory. A rotational device is proposed in this study as a fast laboratory-scale formulation development, which enables mimicking the mixing conditions in the industrial process. The geometrical configurations of the rotational device are from rheometry devices (plate-plate and cone-plate). The main advantages of this method are the small amounts of raw materials and shorter testing times. This methodology is applied to an industrial case study, the reaction injection molding (RIM) process. The mixing length scales evolution in the rotational rheometer were matched to those in RIM machines. The main novelty of this study is the introduction of a protocol that bridges the processing conditions at laboratory using small amounts of raw materials to high throughput continuous flow reactors.     

基于VMD和改进TCN的短期光伏发电功率预测

光伏发电功率存在波动性,且光伏出力易受各种气象特征影响,传统TCN网络容易过度强化空间特性而弱化个体特性。针对上述问题,文中提出一种基于VMD和改进TCN的短期光伏发电功率预测模型。通过VMD将原始光伏发电功率时间序列分解为若干不同频率的模态分量,将各个模态分量以及相对应的气象数据输入至改进TCN网络进行建模学习。利用中心频率法确定VMD的最优分解模态分解个数。在传统TCN预测模型的基础上,使用DropBlock正则化取代Dropout正则化以达到抑制卷积层中信息协同的效果,并引入注意力机制自主挖掘并突出关键气象输入特征的影响,量化各气象因素对光伏发电的影响,从而提高预测精度。以江苏省某光伏电站真实数据为例进行仿真实验,结果表明所提预测方法的RMSE为0.62 MW,MAPE为2.03%。     

基于跨临界CO2热泵的茶叶生产能源系统负荷削减潜力

乡村产业中的化石能源设备逐渐被电能技术替代，引起了乡村负荷波动增大、部分时段产生集中高负荷的问题。为了解决以上问题，将低品位清洁能源应用至乡村的茶叶生产中，针对烘茶全过程的工艺要求提出了跨临界CO₂热泵烘茶技术；并以某茶叶生产乡村为对象，对其代表台区的全年日用电量及产茶日负荷进行了分析，得出采用CO₂热泵烘茶后其负荷得到大幅度削减，整体可降低至原负荷的39.6%~46.8%，峰值负荷与平时负荷的比值由原本的13.6降至5.4~6.2。跨临界CO₂热泵应用至农产品生产中可有效缓解乡村供电压力。     

Hydrogen storage and electrochemical properties of annealed low-Co AB5 type intermetallic compounds

The structure, hydrogen storage and electrochemical properties of annealed low-Co AB₅-type intermetallic compounds have been investigated. La-alloy, Nd-alloy and Cr-alloy are used to represent La_0.8Ce_0.2Ni₄Co_0.4Mn_0.3Al_0.3, La_0.6Ce_0.2Nd_0.2Ni₄Co_0.4Mn_0.3Al_0.3 and La_0.6Ce_0.2Nd_0.2Ni_3.8Co_0.4Mn_0.3Al_0.3Cr_0.2, respectively. The XRD results indicated that annealed samples are all single-phase alloys with CaCu₅ type structure. The maximum of both hydrogen content and discharge capacity is obtained for La-alloy 1.23 wt%H₂ and 321.1 mA h/g, respectively. All the investigated alloys are quiet stable with ΔH of hydrogen desorption about 36–38 kJ/mol H₂. Cycle life of alloy electrode has been improved by partial substitution of La for Nd and Ni for Cr. The highest capacity retention of 92.2% after 100 charge/discharge cycles at 1C has been observed for Nd-alloy. The hydrogen diffusion coefficient measured by PITT is higher at the start of charging process and dramatically reduces by 2–3 order of magnitude with saturation of β-hydride. The highest value 6.9 × 10^?13 cm²/s is observed for La alloy at 100% SOC. Partial substitution La for Nd and Cr for Ni in low-Co AB₅ metal hydride alloys slightly reduces maximum discharge capacity, HRD performance and hydrogen diffusion kinetics. Low-Co alloys show good overall electrochemical properties compared to high-Co alloys and might be perspective materials for various electrochemical applications.     

Discriminating between the effect of pulse width and duty cycle on the hydrogen generation performance of 3-D electrodes during pulsed water electrolysis

The present study investigates the effect of applying voltage and current pulses during alkaline water electrolysis using 3-D Ni-based electrodes. The pulses had a square shape and alternated hydrogen production and resting time. When voltage pulses were applied, it was observed that the current at on-time was systematically higher than the current during DC electrolysis. However, during off-time, a change in polarization was observed, which decreased the overall voltage pulse performance. For pulses with a 50% duty cycle and a pulse width of 1 ms, the current response was mainly capacitive and almost no hydrogen production occurred. Current pulses on the other hand were proven to be much more promising in improving the energetic process efficiency. In that case, a pulse period of 2 ms resulted in an overpotential reduction of 17% for a 50% duty cycle. This reduction further increased to 28% when decreasing the duty cycle to 20%. Finally, in all cases where faradaic processes were dominant, applying a forced electrolyte flow was shown to be beneficial.     

Effects of direct current magnetic field treatment time on the properties of pork myofibrillar protein

This study investigated the effects of direct current magnetic field (DC-MF) treatment time (1, 3, 5, 8 h) on properties of porcine myofibrillar protein (MP). Gel water-holding capacity increased from 83.40% to 87.20% when DC-MF-treatment time changed from 1-h to 8-h. The 3-h treatment time of DC-MF was found to promote MP unfolding, rearrangement and aggregation, leading to the loss of total sulfhydryl, the increase of reactive sulfhydryl, surface hydrophobicity, turbidity as well as the formation of MP clusters and the greater degree of crosslinking as compared with 0-h treatment, thus a firmer and more ordered MP gel network for trapping more water. However, excessive DC-MF treatment (8-h) weakened DC-MF effect on MP aggregation as well as gel network and texture. This study has shed light on the effects of DC-MF treatment time on MP properties and provides useful information for the application of DC-MF in the food industry.     

α-Stirling hydrogen engines for concentrated solar power

α-Stirling engines are receiving more and more attention for applications of concentrated solar power in small power installations (15–30 kW). The design of these engines has not experienced in recent years the breakthrough needed to deliver close to the Carnot Cycle energy conversion efficiencies. The delivered efficiencies are limited to mid-to-high 20% in the typical installations “Dish Stirling”. Here we review the latest studies made on α-Stirling engines, unfortunately mostly based on theoretical models of limited reliability, but also including very few examples of Computer-Aided Engineering (CAE) modeling followed by prototyping and testing. Finally, we present in detail one CAE model of an α-Stirling engine delivering energy conversion efficiencies of 42% with hydrogen as working fluid and adopting one hot cylinder, one cold cylinder, and one regenerator, with the hot fluid temperature of 800 °C. This efficiency is much higher than current air microturbines, which may deliver efficiencies of only about 20% working at much lower temperatures.